PSI of bottles?

Guides and discussions about building water blasters and other water warfare devices such as water balloon launchers.
Post Reply
Neptune
Posts: 127
Joined: Sun Sep 16, 2012 8:41 pm
Location: NJ, 07755
Contact:

PSI of bottles?

Post by Neptune » Thu Dec 20, 2012 10:34 pm

For an APH. Does anyone know how much a soda bottle is rated to? I'd assume any carbonated beverage container has to be rated to some extent.
I've got 110 problems but a <Nice lady> Ain't one

TheSoaker
Posts: 331
Joined: Sat Nov 26, 2011 6:10 pm
Location: LV426 (as you humans call it)

Re: PSI of bottles?

Post by TheSoaker » Fri Dec 21, 2012 12:21 am

Soda bottles explode at around 90 PSI according to the myth busters but if you keep it between 60 and 70 PSI you should be safe. Also on YouTube there's a couple of vids using soda bottles as AP Pcs so go ahead.
super soaker cps 2000......SUPER SOAKER CPS 2000!!!!!!!!!1!!!1!!one

GJIV
Posts: 443
Joined: Sun Oct 31, 2010 8:21 am
Location: Earth: Austria
Contact:

Re: PSI of bottles?

Post by GJIV » Fri Dec 21, 2012 4:30 pm

I have playd around with these and they are great.

From experiences I know these bottles can hold over 15 bar /(tested with 17 bar), important here is that there is something sparkling inside it(a water bottle with normal water inside will not handle this pressure, may 7-9 bars if ever)

best thing is to test one bottle brand( water sparkling for instance) so you can be sure how much pressure it can hold :)

CoCa Cola bottles do handle 12 bars without problems, may more but do not take for guarantee ;)

Always there for questions :)

User avatar
atvan
Posts: 1226
Joined: Tue May 24, 2011 5:19 pm
Location: A place you've never heard of

Re: PSI of bottles?

Post by atvan » Tue Dec 25, 2012 8:41 pm

Some on here are strongly against soda bottles (I believe SSC Ben is) and make valid points. They are not always reliable and can create dangerous shrapnel if they fail. You should take some sort of precaution to keep them from failing.

It is generally considered true that name brand soda bottles will be more durable than off brand bottles.
DX wrote:In the neanderthal days of K-modding, people would lop off the whole PRV
Well, not that much soakage.
Beware the Purple

Drenchenator
Posts: 258
Joined: Tue Aug 03, 2004 10:56 am
WWN League Team: Havoc

Re: PSI of bottles?

Post by Drenchenator » Wed Dec 26, 2012 12:53 am

I'm against people using soda bottles as pressure chambers. They make decent reservoirs if you're on a budget, but as chambers they are too thin.

You may test out a bottle in ideal conditions (no additional stress) and get 100 to 200 psi, but in battle there would be additional stress. For example, standard wear and tear may make it burst because of how thin and flexible the bottle is. In a battle, you have to move around quickly and may have to slam your gun around a bit. Do you really trust a thin soda bottle at 60 psi?

What if you drop the gun accidentally? Let's try out a simple thought experiment. If you have 1 L of water in the chamber, and all that weight falls onto a square centimeter of area, you get about 14 psi of additional pressure on that spot. If the chamber lands on a weak spot, that could be enough extra pressure to cause the chamber to rupture. That's why I would not use soda bottles as chambers: the safety factor is really quite small.

Edit: I fixed a typo.
The Drenchenator, also known as Lt. Col. Drench

soakinader
Posts: 815
Joined: Thu Jul 12, 2012 2:10 pm
Location: Surrey, BC, Canada

Re: PSI of bottles?

Post by soakinader » Fri Dec 28, 2012 7:16 pm

If I ever use a pop bottle for a PC, I plan to wrap it in clear tape so that if it does decide to fail it won't be so much "catastrophic explosion of plastic shrapnel" as "leaking all over me suddenly".
My friends call me Nader. My foes just run.
Photos relocated to: https://www.flickr.com/photos/151868511 ... 8741427445
I find 'em, I fix 'em.

Post Reply

Who is online

Users browsing this forum: No registered users and 68 guests