WaterWar.net

this would only work if u have a hose tap in your base -


i have not made one yet but it might work
materials

600mm 0f pvc pipe
4x 90 degrees right angular elbows
hose adaptor to connect to hose
epoxy
drill
small drill bit
hand saw
camo paint/gear



1.cut pvc into four 150mm long sections with a hand saw

2.drill two holes exactly 60mm apart on two of the bits of pvc with the drill (do not drill through the other side of the pipe)

3.attach the 4 bits of pvc to the elbows (make sure you have the holes on the two bits of pvc facing diagonally into the air) to form a square and epoxy it in.

4.wait for the epoxy to dry

5.add hose adaptor

6.paint with grass camo

using the mine

1.place on grass so the two sides of the mine that have holes in are facing out of your base

2.when unsuspecting enemy attacks your base turn on tap at full

3.watch your enemy gets soaked !!!

Welcome to the Forums!

Thats a cool idea and I would say its quite an improved version of my other idea, portable base defense mark 1.
Interesting. I hope you can make it sucessfully and post back, describing its capabilities!

mkhadem

sorry i am new to the forums!

No need to be sorry.

thanks