My CPS 2700 seems to be leaking right at the corner formed by the pumping chamer and the handle of the gun.
Could you guys give me some tips on how to fix it?
Note: I really don't want to open up my blaster. :bm2700:
Leaking - CPS 2700
You can not fix leaks without opening the water gun to be to the source of the leak.
The CPS 2700 must have a pump cap sawed off carefully as to not accidentally chop off the pump itself. From there, pump the water gun with a dry reservoir and place the internals in a bucket of water to see where the bubbles come from. From there, just use a strong bonding glue correctly to fill in the hole/crack.
Hope this helps!
The CPS 2700 must have a pump cap sawed off carefully as to not accidentally chop off the pump itself. From there, pump the water gun with a dry reservoir and place the internals in a bucket of water to see where the bubbles come from. From there, just use a strong bonding glue correctly to fill in the hole/crack.
Hope this helps!
Who is online
Users browsing this forum: No registered users and 37 guests