Max-D 5000 Question - ^

[Speedbeetle06]

I have 2 Max-D 5000's and tried to take one apart. I got all the screws out, but can't get the part around the base of the pump apart.

Can anyone help?

Sorry about the title of this topic... I knid of messed up there.

:bm2700: :laugh:



Edited By Speedbeetle06 on 1145743778

[isoaker]

This topic belongs in The Armoury.

As for getting the pump cap off, there are many ways, but no absolute guaranteed easy way. I've gotten pump caps off through a lot of prying and working apart using a flat head screwdriver and a knife.

[marauder]

I don't have a max D 5000 anymore (had two at one time) but I'm guessing it's not a screw off type. What I typically do is try to pop those things off witha flat head screwdriver that way you can get it open but it'll still be there to work later.

[Speedbeetle06]

Will it damage the pump cap though?

[Crashdummy]

Not if you are careful. :p You can get it off, don't worry. Once you wedge a little screwdriver in, it will pop right off.

[Speedbeetle06]

Ok I'll try that.





I tried it and it worked, however it chewed it up quite a bit. Thanks.

Now that its apart, is there any way I can mod it to make it shoot farther?

:bmhelix:



Edited By Speedbeetle06 on 1145759826

[Croc]

If you have epoxy, CVF it and make it a Max-P 5000 (just epoxy everything that could possibly pop out, so it really works!) There is a post on Super Soaker central, but it is very vague